 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TAR8H06K TOSHIBA BIPOLAR LINEAR INTEGRATED CIRCUIT SILICON MONOLITHIC TAR8H06K Dual Low-Dropout Regulator TAR8H06K is a bipolar type 2-system output power supply with a control pin. ON and OFF can be switched using the control pin. Features * * * Include 2-regulators (1.5 V, 2.5 V) Overtemperature/overcurrent protection Very small 8-pin package Weight: 0.01 g (typ.) Pin Assignment (top view) VOUT (A) VIN (A) 8 7 VIN (B) VOUT (B) 6 5 VOUT (A) = 1.5 V VOUT (B) = 2.5 V 1 2 3 CONTROL NOISE (A) NOISE (B) 4 GND Marking 8H06 Overtemperature protection and overcurrent protection functions are not necessary guarantee of operating ratings below the absolute maximum ratings. Do not use devices under conditions in which their absolute maximum ratings will be exceeded. 1 2007-11-01 TAR8H06K Absolute Maximum Ratings (Ta = 25C) Characteristics Supply Voltage Output Current (A-channel) Output Current (B-channel) Power Dissipation Operation Temp. Range Storage Temp. Range Symbol VIN IOUT (A) IOUT (B) PD Topr Tstg Rating 12 100 150 200 400 -40 to 85 -55 to 150 (Note 1) (Note 2) Unit V mA mW C C Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). 2 Note 1: Unit Rating Note 2: Mounted on a glass epoxy circuit board of 30 x 30 mm Pad dimension of 70 mm Electrical Characteristics (unless otherwise specified, VIN = 3.6 V, CIN = 1 F, COUT = 10 F, CNOISE = 0.01 F, VCT = 3.6 V, Tj = 25C) 1.5 V Output Characteristics (VOUT (A)) Characteristics Output Voltage Load Regulation Line Regulation Temp. Coefficient Symbol VOUT (A) Test Condition IOUT (A) = 30 mA Min 1.44 Typ. 1.5 10 1 100 65 Max 1.56 30 20 Unit V mV mV ppm/C dB Regload (A) IOUT (A) = 0 mA to 30 mA Regline (A) TCVO (A) R.R.1 (A) VIN = 4.0 V to 8.0 V Ta = -40C to 85C VIN = 5.0 V, IOUT (A) = 10 mA, f = 200 Hz, VRipple = 1 Vp-p, Ta = 25C VIN = 5.0 V, IOUT (A) = 10 mA, f = 200 kHz, VRipple = 1 Vp-p, Ta = 25C IOUT (A) = 10 mA, 10 Hz < f < 10 kHz, Ta = 25C == IOUT (A) = 30 mA, VCT = 0 V 3 V (tr = 10 ns) Ripple Rejection R.R.2 (A) Output Noise Voltage Output Rise Time VNO (A) trise (A) 50 dB Vrms ms 30 1 2 2007-11-01 TAR8H06K 2.5 V Output Characteristics (VOUT (B)) Characteristics Output Voltage Dropout Voltage Load Regulation Line Regulation Temp. Coefficient Symbol VOUT (B) Test Condition IOUT (B) = 60 mA Min 2.43 Typ. 2.5 150 10 1 100 65 Max 2.57 300 60 20 Unit V mV mV mV ppm/C dB VIN-VOUT (B) VIN = 2.6 V, IOUT (B) = 60 mA Regload (B) IOUT (B) = 0 mA to 60 mA Regline (B) TCVO (B) R.R.1 (B) VIN = 4.0 V to 8.0 V Ta = -40C to 85C VIN = 5.0 V, IOUT (B) = 10 mA, f = 200 Hz, VRipple = 1 Vp-p, Ta = 25C VIN = 5.0 V, IOUT (B) = 10 mA, f = 200 kHz, VRipple = 1 Vp-p, Ta = 25C IOUT (B) = 10 mA, 10 Hz < f < 10 kHz, Ta = 25C == IOUT (B) = 60 mA, VCT = 0 V 3 V (tr = 10 ns) Ripple Rejection R.R.2 (B) Output Noise Voltage Output Rise Time VNO (B) trise (B) 50 dB Vrms ms 30 1 Common Characteristics Characteristics Stand-by Current Quiescent Current Control Voltage (ON) Control Voltage (OFF) Control Input Current Symbol IB (OFF) IB VCT (ON) VCT (OFF) ICT VCT = 0 V IOUT (A) = 30 mA, IOUT (B) = 60 mA Test Condition Min Typ. Max 10 2 Unit A mA V V A 2.2 1 VCT = 3 V (output ON) 0.4 30 3 2007-11-01 TAR8H06K Application Note Recommended Application circuit VOUT (A) VIN (A) 10 F VIN (B) VOUT (B) 10 F 6 5 1 F 8 7 1 F Control level HIGH LOW 1 0.01 F 2 0.01 F 3 4 A-channel ON OFF B-channel ON OFF CONTROL NOISE (A) NOISE (B) GND The noise capacitor should be connected to NOISE pin to GND for stable operation. The recommended value is higher than 0.0047F. The figure above shows commended configuration for using a point regulator. Insert a capacitor for stable input/output operation. If the control function is not to be used, Toshiba recommended that the control pin be connected to the VCC pin. 4 2007-11-01 TAR8H06K Ripple Rejection TAR8H06K feature a circuit with an excellent ripple rejection characteristic. Because the circuit also features an excellent output fluctuation characteristic for sudden supply voltage drops, the circuit is ideal for in the RF blocks incorporated in all mobile telephones. Ripple Rejection - f 80 70 Input Transient Responce VOUT(A) (dB) 60 10 F 50 40 1 F 30 20 10 0 10 1.5 V 2.2 F 3.6 V Input Voltage 3.9 V Ripple Rejection Output voltage VIN = 3.6 V, CNOISE = 0.01 F, CIN = 1 F, Vripple = 1Vp-p, Iout = 10 mA, Ta = 25C 100 1k 10 k 100 k 300 k 0 1 2 3 4 Ta = 25C, CIN = 1 F, Cout = 10 F, CNOISE = 0.01 F, VIN: 3.9 V 3.6 V, Iout = 30 mA 5 6 7 8 9 10 Frequency f (Hz) time t (ms) Input Transient Responce VOUT(B) Input Voltage 3.1 V 2.8 V 2.5 V Output voltage Ta = 25C, CIN = 1 F, Cout = 10 F, CNOISE = 0.01 F, VIN: 3.1 V 2.8 V, Iout = 60 mA 0 1 2 3 4 5 6 7 8 9 10 time t (ms) NOISE Pin TAR8H06K device incorporate a NOISE pin to reduce output noise voltage. Inserting a capacitor between the NOISE pin and GND reduces output noise. To ensure stable operation, insert a capacitor of 0.0047 F or more between the NOISE pin and GND. CNOISE - VN 60 CIN = 1 F, Cout = 10 F, (V) 50 Iout = 10 mA, Ta = 25C VN Output noise voltage 40 30 20 10 0 0.001 0.01 0.1 1.0 NOISE capacitance CNOISE (F) 5 2007-11-01 TAR8H06K VOUT(A) - VIN 6 IOUT = 1 mA, CIN = 1 F, COUT = 10 F, CNOISE = 0.01 F Pulse width = 1 ms 6 VOUT(B) - VIN IOUT = 1 mA, CIN = 1 F, COUT = 10 F, CNOISE = 0.01 F Pulse width = 1 ms (V) VOUT 4 VOUT Output voltage 5 10 15 (V) 5 5 4 Output voltage 3 3 2 2 1 1 0 0 0 0 5 10 15 Input voltage VIN (V) Input voltage VIN (V) VN - f 10 PD - Ta 500 (V/ Hz ) VIN = 3.6 V, IOUT = 10 mA, CIN = 1 F, 1 (mW) Power dissipation PD COUT = 10 F, CNOISE = 0.01 F, 10 Hz < f < 100 kHz, Ta = 25C 400 Output noise voltage VN 0.1 300 0.01 200 Circuit board material: grass epoxy. Circuit board dimension: 30 mm x 30 mm Pad area: 70 mm2 (t = 0.8mm) 100 -40 0 40 0.001 10 80 120 100 1k 10 k 100 k Ambient temperature Ta (C) Frequency f (Hz) 6 2007-11-01 TAR8H06K Package Dimensions Weight: 0.01 g (Typ.) 7 2007-11-01 TAR8H06K RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 8 2007-11-01 |
Price & Availability of TAR8H06K
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |